5.6 3DNR (Digital Noise Reduction)
You can configure the DNR (Digital Noise Reduction) related settings. if you press the Setup
switch when ON is selected in 3DNR, the corresponding screen appears.
5.7 SPECIAL
1)
CAM TITLE
2)
D-EFFECT
FREEZE
MIRROR
D-ZOOM
GAMMA
NEG. IMAGE
A. CAM TITLE
B. Character Table
C. Command Line
CLR: Erase all characters
POS: Move the position of title
END: Save and End
Select the real or still mode.
Reverse the screen in 3 modes selection.
(OFF / MIRROR / V FLIP / ROTATION)
D-Zoom (x~x3) / Adjust PAN / TILT (x,~x3)
Adjust the luminance (0.05~.00)
Select the negative or positive mode.
: Move to left
: Move to right
3