Power Output - ToolKitRC M8 Manual

Power output

Rotate the encoder disk on the output main
interface to move the cursor to the [Power] item,
press [OK] to enter the power output function. This
product will output the input power according to the
set voltage and current, constant voltage and
constant current. The display interface is as shown
below
Typical value: It is a common typical output mode,
which can be set to the following three modes.
1. Input pass-through: Do not achieve constant
current and constant voltage, and output the input
voltage directly from the output main port.
2, custom: users can manually set the need to lose
according to demand The voltage and current limit.
3, commonly used drone battery charging, select
the corresponding battery, automatic
Configure the relevant output voltage and current
29
@ ToolkitRC 2018