5，Current Setting - ToolKitRC M8 Manual

balance port, the number of battery strings
can be more accurately identified.
=================================
5，Current setting
Move the cursor to the charging current [2.0A]
position and press [OK] to modify the charging
current. Turn [Code Plate] to adjust the value and
step 0.1A. Quickly rotate [code plate] to add or
subtract quickly. The charger supports up to
15.0A.
Move the cursor to the discharge current [2.0A]
position and press [OK] to modify the discharge
current. Turn [Code Plate] to adjust the value and
step 0.1A. Fast rotation [code plate] can be quickly
reduced. The charger supports two discharge
modes. 1, ordinary discharge mode, through internal
heat dissipation
3.0A@20W discharge. 2, recovery discharge mode,
when the input is battery power, through this
14
discharge, maximum
@ ToolkitRC 2018
support