2，Cutoff Voltage Setting（Tvc - ToolKitRC M8 Manual

2，Cutoff voltage setting（TVC）
Move the cursor to [4.200V] and press [OK] to
modify the single-chip battery charge cut-off
voltage. Turn [Code Plate] to adjust the value and
step 1mV.
=================================
1, only LiPo, LiHV, LiFe battery can set the
cutoff voltage
2. Do not modify the cutoff voltage when you
are unfamiliar with battery characteristics.
3, the cutoff voltage can be set to the range
of positive and negative 50mV of full
voltage
4, vocabulary explanation: TVC: terminal
voltage control English abbreviation
=================================
11
@ ToolkitRC 2018