Application Examples - Keithley DAQ6510 User Manual

DAQ6510 Data Acquisition / Multimeter System User's Manual

Application examples

This manual provides application examples that show you how to perform tests from the front panel
and over a remote interface. The applications include:
• Making basic front-panel measurements:
using a single DAQ6510 and a two-terminal device under test.
• Making basic scans:
DAQ6510.
• Scanning temperature using thermocouples:
log thermocouple-based temperature measurement scans.
• Scanning low-level DCV:
DC voltage in a variety of ranges
• Scanning resistors using 4W measurement:
accurately measure resistance devices
• Mixed function multi-channel scanning:
complex multi-channel, mixed function scanning in a production-test environment.
• Speed scanning for increased production test throughput:
right multiplexer module can increase your productivity by reducing overall test time.
• Pre-scan monitoring:
function until the testing environment has reached a specific temperature.
DAQ6510-900-01Rev. A / April 2018
(on page 4-1) Shows the basic measure functionality
(on page 4-1) Shows the basic measure scan functionality using a single
(on page 5-1) Shows how to use the DAQ6510 to
(on page 6-1) Shows how to use the DAQ6510 to accurately measure
(on page 7-1) Shows how to use the DAQ6510 to
(on page 8-1) Shows how to use the DAQ6510 to perform
(on page 10-3) Shows how to configure the DAQ6510 to delay its scanning
Section 1: Introduction
(on page 9-1) Shows how selecting the
1-3