DAQ6510 Data Acquisition / Multimeter System User's Manual
Test results
The following procedure shows the results for this application.
1. Press the Menu key.
2. Under Views, select Reading Table.
3. Scroll the reading table noting both the measurements and labels in the Channel column of the
table.
To save the scanned measurements to a USB flash drive:
1. Select the MENU key.
2. Under the Measure column, choose Reading Buffers.
3. Insert a USB flash drive into the DAQ6510, select Save to USB.
4. Select the Change button adjacent to the Filename label, enter MixedScan using the dialog
provided.
5. Select OK.
DAQ6510-900-01Rev. A / April 2018
Figure 42: DAQ6510 reading table mixed function multichannel scanning
Section 8: Mixed function multi-channel scanning
8-7