Table of Contents
Advertisement
Operating a computer by the remote control
You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable. In this manual,
this function is explained as "mouse remote control".
CONTROL
USB
MONITOR OUT
COMPUTER IN 1
( Y/P
AUDIO
AUDIO
OUT
IN
To USB connector
Be sure to connect in the proper
direction.
Notes
• This function is available with Windows98 and Mac OS9 computers equipped with a USB port as standard.
• When connecting the computer's USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer's
monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.
• When using a USB cable other than the supplied one, be sure to use a shielded type.
Remote control
INPUT
COMPUTER IN 2
KEYSTONE
/P
)
B
R
VIDEO IN
R - AUDIO - L
VIDEO
S-VIDEO
L-CLICK
MENU
PIP
CALL
USB cable (supplied)
Point the remote control at the remote control
sensor on the projector when operating with its
buttons.
ON/STANDBY
LASER
• To move the pointer
AUTO
SET
Press the outer side of the pointer control button
in the direction in which you want to move the
Pointer control
pointer. (The speed at which the pointer moves
depends on how strongly the button is pressed.)
• To click
R-CLICK
R-CLICK
Press L-CLICK or the center of the pointer
L-CLICK
VOLUME/ADJUST
control.
• To right-click
Press R-CLICK.
• To drag and drop
ENTER
EXIT
While holding down the center of the pointer
FREEZE
control, press the rim side to move the pointer to
RESIZE
MUTE
the desired spot, then release the center part.
Computer
CONTENTS
To USB port
39
Advertisement
Table of Contents
