Av Cable; Connecting Video Equipment; Video Jack; Contents - Toshiba TLP-X10E Manual

3lcd data projector
Hide thumbs Also See for TLP-X10E:
Table of Contents

Advertisement

Connecting video equipment

You can project the picture from video equipment by using VIDEO IN connectors.
Check that the power for the projector and video equipment is off before connecting the cables.
CONTROL
USB
MONITOR OUT
AUDIO
AUDIO
OUT
IN
(Red) To AUDIO-R jack
(White) To AUDIO-L jack
Note
The S-VIDEO connector and VIDEO jack can be used independently, but the audio input jacks are used as both the S-VIDEO and VIDEO input.
COMPUTER IN 1
COMPUTER IN 2
( Y/P
)
/P
B
R
VIDEO IN
R - AUDIO - L
VIDEO
S-VIDEO
To S-VIDEO connector
Be sure to connect in the proper
direction.
S-video cable
(not supplied)
(Yellow) To VIDEO jack
S-VIDEO connector
At shipping from factory, the projector is set so that this connector cannot be
selected by the INPUT button.
Change the setting on the menu screen when using.
Video equipment
To S-video output
Pin plug (yellow)
To video output
AV cable (supplied)

CONTENTS

48
Pin plug (red)
To audio output (R)
Pin plug (white)
To audio output (L)
Continued
24

Advertisement

Table of Contents
loading

Table of Contents