Connecting The Pr-Cable (Port Replicate-Cable) To The Projector - Toshiba TDP590 Manual

S e t t i n g
CAUTION: Turn off the
computer, monitor and projector
whenever you connect or
disconnect cables.
NOTE: In some older
computers, the monitor
connector does not have a hole
for Pin 9. If you have trouble
connecting the PR-Cable cable
to your computer, contact your
6
u p t h

Connecting the PR-Cable (Port Replicate-Cable) to the Projector

The PR-Cable (referred to as "PR-Cable" in this manual for brevity)
simplifies the connection process by providing a central hub for all the
connections between the projector and your computer. The connectors
on the PR-Cable are labeled with icons. The PR-Cable also has an LED
that lights solid green when the projector is on and PR-Cable is func-
tioning properly. A slowly blinking LED indicates PR-Cable is waiting
to initialize with the projector; a rapidly blinking LED indicates a prob-
lem with PR-Cable.
Connect the
connector on the projector's connector panel (Figure 5).
F 5
IGURE
Connecting the PR-Cable to the projector
dealer.
e P r o j e
end of the PR-Cable cable to the
c t o r