Remote Mouse Receiver; Ibm/Mac Mouse Cable; Ps/2 Mouse Adapter; Mac Mouse Adapter - Toshiba TDP-ET20 Owner's Manual

Operations
Operating the computer
by the remote control
Connecting the REMOTE MOUSE RECEIVER
Check that the power of the computer is turned off.
Connect the REMOTE MOUSE RECEIVER.
Remove the mouse actually used and change it to the supplied cable.
PV-98 IBM/Mac

REMOTE MOUSE RECEIVER

(supplied)
If you connect the iREMOTE MOUSE
RECEIVER to the computer, the supplied
remote control can work as a mouse of the
computer.
USB Mouse cable
(supplied)
USB
PS/2
IBM/MAC
Mouse adapter
Mouse cable
(supplied)
(supplied)
MAC
Mouse adapter
(supplied)
Notes
• To operate the projector and the computer by
the remote control, place the REMOTE
MOUSE RECEIVER close to the projector.
• When connecting the REMOTE MOUSE
RECEIVER to an IBM PC/DOS V computer,
use the supplied PS/2 mouse adapter if you
are using a PS/2 mouse, or connect the
supplied IBM/MAC cable directly to your
computer if you are using a serial mouse.
• When connecting the REMOTE MOUSE
RECEIVER to the USB PORT for the first
time, insert the "Windows98 CD-ROM" and
install the device drivers for a USB
interchangeability device and a USB human
interface devices (two kinds). The installation
USB
starts automatically when you connect a USB
PORT
mouse cable connected to the remote mouse
IBM PC
receiver to the USB port of your computer.
DOS/V
SERIAL
PORT
PS/2
MOUSE
PORT
Macintosh
MAC
MOUSE
PORT
25
CONTENTS
(Continued)