Lock The White Balance - Toshiba TLP-X10E Manual

Lock the white balance

W.BALANCE STORE IMAGE ARM LIGHT
LOCK
Camera
CAMERA CAMERA
GAIN control panel
2
Normally, this camera automatically adjusts the color balance to project the picture. If the
adjustment is not sufficient, follow the steps below to lock the white balance.
1 Project a white paper and enlarge it to fill the
screen.
2
Press W.BALANCE to turn the LOCK indicator
LOCK W.BALANCE
on.
The white balance is locked.
To release the white balance, press W.BALANCE again to turn
the LOCK indicator off.
Notes
• If you raise up the arm while the camera input is selected, the color of the picture may vary for
an instant due to the automatic white balance adjustment. This is not a malfunction.
• If you put back the arm and raise it up while the white balance is locked (the LOCK indicator is
lit), the projector releases the white balance.
79
CONTENTS