Table of Contents
Advertisement
6. Track scanning
Track scanning enables you to listen to the first few seconds of each
track on the disc.
Press and hold the MENU button (6) for two seconds ('SCAN'
appears in the display). Press the MENU button again to stop the
scan at your chosen track.
NOTE: The scan time can be adjusted to suit your requirements
(see 'MENU CONTROL FUNCTIONS', page 110).
7. CD mode selection/CD eject control
Press briefly to change to or from CD or radio modes.
With the audio unit switched on, press and hold for two seconds
or more to eject a disc.
Changing the display
The information appearing in the display can be set to show either:
the track number (e.g 'T18 PLAY'), or the track number and
elapsed time display (e.g T12 2:39'), as follows:
1. Press the MENU button (6).
2. Press the
control until 'CD DISP' is displayed.
3. Press the
controls alternately to select 'PLAY' or 'TIME'.
4. Press the MENU button twice to store your selection.
Compact Disc Player
3
99
Advertisement
Table of Contents
