Rewinding The Film - Contax 167MT Manual

When the entire roll of film is exposed, the camera
will stop winding the film and all indicators in the
display panel, such as the exposure counter, shutter
speed and aperture, will blink.
tr While pressing the rewind release button, slide the
Rewind Switch in the direction of the arrow ("<") The
Film Rewind Mark " O<< " will turn on in the display panel
and the camera will start rewtnding the film When it is
completely wound back into its cassette, you will hear a
shutter tripping noise and the rewinding operation will
automaticallv stoo.
While the film is rewinding, the Film Transport Signal will
turn backward and the Exposure Counter will blink,
showing the number of the last exposed frame After
rewinding is completed, it will show "00".
o After the film has started rewinding, remove your finger
from the Rewind Switch lt will automaticallv return to its
original position
Z Make sure the motor has stopped and the Exposure
Counter shows "00", then open the Camera Back and
unload the film. Avoid direct sunliqht to unload it.
48