Mounting The Lens; Dismounting The Lens - Contax 167MT Manual

< Mounting the Lens>
First, remove the camera's body cap and lens' rear cap
by turning them counterclockwise. Then, align the red dot
on the lens with the Lens Index on the camera, Jit it in and
turn it clockwise until it locks with a click.
When mounting and dismounting a snap-type lens cap,
press in the side tabs
< Dismounting the Lens>
While pressing in the Lens Release Button, turn the lens
counterclockwise
as far as it will go and pull it out toward
you. After dismounting the lens from the camera, protect
the lens with the lens cap and rear cap, and the camera
with the body cap.
o Do not touch the lens surface and camera inside with
your fingers when attaching and detaching the lens.
o Avoid direct sunlight when changing the lens with film
loaded in the camera
i
I
I
f
,
t o