Loading The Batteries - Contax 167MT Manual

All important components and functions of the
Contax 167MT including automatic film winding and
rewinding, shutter operation and display panel are
battery-powered. The camera does not operate unless
batteries are loaded in it.
Il Loosen the Battery Compartment Cover Screw on the
camera bottom with a coin and remove the cover.
E Insert four batteries with the plus (+)and minus (-)
ends correctly, as illustrated inside the Battery
Compartment. The camera does not operate if they are
loaded with wrong (+)and (-) ends.
To replace the battery compartment cover, fit the guide
pin on the camera to the hole in the cover, close it and
lock it with the fixing screw.
The camera uses four 1.5 V AM-size batteries. lt is
recommended to use high-performance
alkaline-
manganese batleries, because some of its functions such
as continuous shooting are affected by the battery
performance.
@
"airfr$\
1 8