Focusing The Lens; Horizontal Split-Image Spot; Microprism Collar And Matte Screten - Contax 167MT Manual

recte/Enfocado
Focusing ts done with the split-image focusing center,
microprism collar and the surrounding matte screen.
< Horizontal Split-image Spot >
While looking through the viewfinder, turn the Focusing
Ring until the upper and lower segments of the image
coincide. lf the image is out of focus, the two segments
do not coincide.
< Microprism Gollar and Matte Screen >
Turn the Focusing Ring until the image on the microprism
collar or matte screen appears sharp. lf the lens is not cor-
rectly focused, the image on the microprism collar will
appear grainy and that on the matte screen will be unsharp.
iit;;tiltittiiiil1vr4ii:"""":
jit"'itii+'i':
o When using a slow lens or taking close-ups with a high
magnification, you may sometimes find it difficult to focus.
In such cases, use the surrounding matte screen to focus.
o lf you are far- or near-sighted, use optional Fl-type
Diopter Lenses. Threre are eight types available (- 5, - 4,
- 3, -2, 0, + 1, +2, and + 3), which can be attached to
the vieMinder eyepiece.
46