Power Button Board - HP Stream 14 Maintenance And Service Manual

Power button board

Table 5-10 Power button board and cable descriptions and part numbers
Description
Power button board
Power button board cable
Before removing the power button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
4. Remove the display assembly (see
Remove the power button board:
1. Disconnect the cable from the power button board (1).
2. Remove the M2.0 × 3.0 screw (2) that secures the power button board to the computer.
3. Lift the board from the computer (3).
Reverse this procedure to install the power button board.
42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page 24).
Display assembly on page
Spare part number
905579-001
L61392-001
23).
Battery on page 25).
36).