Establish Communication Between Your Lan And First Vision; Figure 3.10 Windows Lan Connection - Honeywell NOTIFIER ONYX FirstVision Installation And Operation Manual

Enabling F V to Monitor Your Building
IRST ISION
3.5 Establish Communication Between Your LAN and
F V
IRST ISION
NOTE: A factory default IP address setting is set to: 192.168.0.4. If you need to change those
settings, then use the following information.
The following steps are performed using Windows operations on F
Step 1. If F
Step 2. Click Start >Control Panel. The Control Panel window displays.
Step 3. Double click on Network Connections. The Network Connections window displays.
Step 4. Right click on Local Area Connections 2 in the Network Connections window and select
Step 5. On the General tab click on "Internet Protocol (TCP/IP)", then click on the Properties
22
V application is running, shut it down (ESC key on direct connect keyboard).
IRST ISION

Figure 3.10 Windows LAN Connection

Properties from the list of choices. The Local Area Connection Properties window
displays.
button. The Internet Protocol (TCP/IP) Properties window displays.
Figure 3.11 Windows LAN Connection Properties
F V ™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
IRST ISION
Establish Communication Between Your LAN and F
IRST
V
IRST ISION
V .
ISION