Copy Your Exported Building Design To First Vision; 1: How To Copy Your Exported Building Design To F; Irst Vision; Figure 3.16 Xml File And Floorplans Folder - Honeywell NOTIFIER ONYX FirstVision Installation And Operation Manual

Copy Your Exported Building Design to F
3.7 Copy Your Exported Building Design to F
This copying task can be accomplished using various methods. The copying method will be
contingent on your connection to F
your building design Site.xml file and Floor plan folder are stored) as part of a TCP/IP network,
you can copy your building design to F
connector, located inside the locking door, on F
3.7.1 How To Copy Your Exported Building Design to F
Step 1. Establish a physical connection between your PC or storage device (i.e. where your
Step 2. Use Window Explorer on F
NOTE: Overwrite the folder and files, do NOT delete the existing site.xml and Floorplans folder.
prior to this step.
Step 3. You should now restart F
Step 4. You should now peform "Display Your Building Design on F
F V ™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
IRST ISION
V
IRST ISION
IRST
Figure 3.15 F
building design Site.xml file and Floorplan folder are stored) and F
"Floorplans" folder to the following folder on F

Figure 3.16 XML File and Floorplans Folder

IRST
Enabling F
V . With F V
ISION IRST ISION
V over the network. You can also use a USB
IRST ISION
V as the connection point.
IRST ISION
V USB Connector Locations
IRST ISION
V to find, select, and copy the Site.xml file and
IRST ISION
V
IRST
V and wait until Windows is displayed.
ISION
V to Monitor Your Building
IRST ISION
V
IRST ISION
and your PC both (i.e. where
V
IRST
V .
IRST ISION
: C:/Facilities Monitoring/FIT.
ISION
V " on page 26.
IRST ISION
ISION
25