Related Manuals for Pilz PSSnet SLL Series
Summary of Contents for Pilz PSSnet SLL Series
- Page 1 PSSnet SLL Series – Devices Unmanaged Ethernet Switches Industrial Ethernet Switches – PSSnet S Installation – Mat- No. 22751 – EN- 01...
- Page 2 All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for internal purposes. Suggestions and comments for improving this documentation will be gratefully received. ® ® ® ® ® ® ® ® ®...
-
Page 3: Table Of Contents
Content Content Safety instructions Legend Device description Description of the device variants Assembly and start-up Installing the device 2.1.1 Unpacking and checking 2.1.2 Installing the SFP modules (if present) 2.1.3 Connecting the terminal block for the supply voltage and the grounding 13 2.1.4 Mounting the device on the DIN rail 2.1.5 Dimensions... -
Page 4: Safety Instructions
EN 60950-1 may be connected to the supply voltage connections. Warning! Only connect a supply voltage that corresponds to the type plate of your device. Use only undamaged parts. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... - Page 5 EN 60950-1. Warning! Never insert sharp objects (small screwdrivers, wires, etc.) into the inside of the product. There is the risk of an electric shock. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
- Page 6 Any work that may be required on the electrical installation may only be carried out by personnel trained for this purpose. Relevant for PSSnet SLL..F..with fiber optic ports. Note: PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
- Page 7 The assembly guidelines provided in these instructions must be strictly adhered to in order to observe the EMC threshold values. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
-
Page 8: Legend
/ state / country. Legend The commendations used in this manual have the following meanings: Listing Work step Subheading PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 9: Device Description
The abbreviations F/O (optical fiber) and TP (twisted pair) indicate the media type. The abbreviations SC and RJ45 indicate the socket type. The abbreviation MM (Multimode) indicate the optical fiber type. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... - Page 10 9.6 to 32.0 V DC Software variant Unmanaged Certifications / declarations pending UL508 (E175531) The devices comply with the specifications of the standard(s): ISO/IEC 8802-03 10BASE-T/100BASE-TX ISO/IEC 8802-03 100BASE-FX PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
-
Page 11: Assembly And Start-Up
Installing the device 2.1.1 Unpacking and checking Check whether the contents of the package are complete (see „Scope of delivery“. Check the individual parts for transport damage. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 12: Installing The Sfp Modules (If Present)
Pull the terminal block off the device. Connect the supply voltage lines. Connect the ground connection. 2.1.4 Mounting the device on the DIN rail Caution! Do not open the housing. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... - Page 13 Attach the upper snap-in guide of the device into the DIN rail and press it down against the DIN rail until it snaps into place. Figure 3: Mounting on the DIN rail PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
-
Page 14: Dimensions
10/100 Mbit/s TP ports enable the connection of terminal devices or inde- pendent network segments according to the IEEE 802.3 10BASE-T/ 100BASE-TX standard. These ports support: Autonegotiation PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 15: Display Elements
Device state These LEDs provide information about conditions which affect the operation of the whole device. Figure 5: Device status LEDs 1 – Power LED (P) PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 16: Port State
No valid connection Flashing 1 time a period 10 Mbit/s connection Flashing 2 times a peri- 100 Mbit/s connection Flashing 3 times a peri- 1000 Mbit/s connection PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 17: Disassembly
(without tipping the screw- driver) downwards and lift the device upwards. Figure 8: Removal from the DIN rail PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... -
Page 18: Technical Data
80 - 2,700 MHz 20 V/m IEC/EN 61000-4-4 Fast transients (burst) DC power line +/- 2 kV (2.5 kHz) Data line +/- 4 kV (2.5 kHz) PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany... - Page 19 Power consumption/power output at 24 V DC Device name Max. power consumption Power output PSSnet SLL 5T 2.2 W 7.5 Btu (IT)/h PSSnet SLL 4T 1FMMSC 3.9 W 13.3 Btu (IT)/h PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
- Page 20 Table 6: List of norms and standards. Certified devices are marked with a certification indicator. From the imprint on the device label you will see the current certification status of your device. PSSnet SLL Pilz GmbH & Co. KG, Felix- Wankel- Straße 2, 73760 Ostfildern, Germany...
-
Page 21: A Further Support
Further support Further support Technical questions and training courses In the event of technical queries, please contact your local Pilz distributor or Pilz office. You can find the addresses of our distributors on the Internet: www.pilz.com. Our support line is also at your disposal: Tel.: +49 711 3409 444...
Need help?
Do you have a question about the PSSnet SLL Series and is the answer not in the manual?
Questions and answers