Manually deleting channels in the channel
memory
There is no method really to delete the channel memory
except executing Auto Ch Search with a empty RF input. But
there is a simple way to disable undesired Channel.
1�
Press
and open the Setup menu
2�
Highlight Manual Ch Set.
3�
, a new set of Manual Channel Set
Press u or
Menu will appear as below.
4�
Press
buttons to highlight the channel.
pq
5�
Press
to cycle select Channel is Viewable or Not
Viewable.
* If the Channel is marked to "Not Viewable". The channel will
be skip when you press "
" or "
"Viewable" or press Channel Number directly.
Channel memory checking table
All the channel search result can be seen on the Manual Ch
Set.
1�
Press
and open the Setup menu
2�
Highlight Manual Ch Set. and adding or deleting
channel memory. Please refer above description.
Chapter 5: Setting up your TV
", unless you set it to
Channel Labels Menu
A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the Channel
Labels window. If the desired channel label is not provided in
the list, you will be able to manually enter/edit labels using
the arrow buttons.
1�
Press
and open the Setup menu
2�
Highlight Channel Labels.
3�
Press u or
, Channel Labels Menu will appear as
below.
4�
Left block is original channel No, right block is new
channel label. Arrow buttons can edit it (maximum 7
character are available).
5�
Press
to save your setting. And you can see the new
Channel Label on top-left of the screen or press
on the remote control to show channel information.
button
1