Setting the time zone
To set the time zone:
1�
Press
and open the Prefer menu.
2�
Highlight Time Zone.
3�
Press
or
to select Pacific, Alaska, Hawaii, Eastern,
u
Central and Mountain.
PacificAlaskaHawaiiEasternCentral
MountainPacific
Note: After you change the Time Zone setting, when you
press
, you will see that the program duration has been
changed. For more details on
status information using INFO" section on this page. .
Displaying TV status information
To display TV status information using RECALL:
Press
on the remote control.
The following information will display (if applicable):
Current input (ANT,Video, etc.)
•
Channel number (if in ANT mode)
•
Channel label (if set)
•
Digital signal strength indicator (bar graph in top right
•
corner of box)
Stereo or SAP audio status
•
Video resolution
•
Aspect ratio of incoming video signal (4:3 or 16:9)
•
V-Chip rating status
•
To close the RECALL screen:
Press
on the remote control.
Chapter 6: Using the TV's features
, see" To display TV
To display TV status information using INFO:
Press
on the remote control.
The following additional information will display for off air
digital channels (if applicable):
Title
•
Duration
•
Detailed description
•
To close the Information screen:
Press
on the remote control.
Understanding the auto power off
feature
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the
TV when the power is resupplied.
Note: You should unplug the TV's power cord if it is possible
that you will be away from the TV for an extended period of
time after the power is restored.