Selecting the video input source
To select the video input source to view:
on the remote control or TV control panel.
And then either:
a) Press numeric key 0~4 directly; or
b) Repeatedly press
to change the input; or
c) Repeatedly press
on the remote control or TV
control panel to change the input.
"No Signal" will appear randomly on the screen if no signal
is received in video input mode.
The Favorites Browser allows you to quickly set up a favorite
channels list and let you jump to prefer channel easily (Highlight
Channel number then press
To add a favorite channel:
Tune to the channel number that you prefer.
button, a new set of Favorite Channel
Set Menu will appear as below.
Chapter 6: Using the TV's features
on the remote control and then
button to add the current display channel to
favorite browser list.
To delete a favorite channel:
button to open the favorites channel set
buttons to highlight the channel then press t
button to delete it.
Tuning to the next programmed channel
To tune to the next programmed channel:
Press or on the remote control or TV control panel.
Note: This feature will not work unless you program channels
into the TV's channel memory ( page 30).
Tuning to a specific channel (programmed
Tuning analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, then
Tuning digital channels:
Press the Channel Number (0–9) on the remote control,
followed by the dash (
) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2, 5, –, 1, then
Note: If a digital channel is not programmed—either through
the automatic channel scan ( page 30) or the channel
add/delete function ( page 30)—you will have to tune the
RF channel using the Channel Number and dash (
Switching between two channels using
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
Select the first channel you want to view.
Select a second channel using the Channel Number
buttons (and the dash (
on the remote control. The previous channel
will display. Each time you press
back and forth between the last two channels that were
) on the
) button if selecting a digital
, the TV will switch