How Can I Change The Ecc500 Ip Address On The Webui - Huawei ECC500 User Manual

ECC500
User Manual
Step 5 Press
Address, Subnet Mask, and Default Gateway to the planned values.
----End
7.5 How Can I Change the ECC500 IP Address on the
WebUI?
Prerequisites





Context
A unified IP address (192.168.1.168) is configured for all ECC500s before delivery.
Reconfigure an IP address for the ECC500 as required to ensure normal communication with
a server.
Procedure
Step 1 On a PC which is in the same IP address segment as the ECC500, enter https://192.168.1.168
in the address box, and press Enter on the keyboard.
Step 2 (Optional) Install a network security certificate if a certificate problem message is displayed.
For details, see
Issue 04 (2019-12-20)
and to modify the value, and press
You have obtained the ECC500 IP address (192.168.1.168 by default) as well as the user
name and password for WebUI login. The preset user name and password used for first
login are respectively admin and Changeme. To ensure access security, change the
password upon first login. For details, see
Password?.
You have installed hardware for the ECC500 and powered it on.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have obtained the IP address, subnet mask, and default gateway information planned
for the ECC500.
The network code that the ECC500 does not support is used as the IP address or gateway
address. Check the network configuration of the ECC500 and ensure that its network
code is different from the gateway address.
7.3 How Can I Install a Network Security
Copyright © Huawei Technologies Co., Ltd.
to move the cursor to change IP
7.7 How Can I Change the ECC500 WebUI
Certificate?.
7 FAQ
69