Start The Calibration Programme - Miele WWV 980 WPS Passion Operating Instructions Manual

6. Start the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:

Open the stopcock and start the Cottons
90°C programme with an empty drum
 Confirm with the
The display will then change to the
standard display for the
Cottons programme.

Overview
Temperature
 90 °C
Cottons
TwinDos
Whites
1:57
h
 Timer
 Touch the Start/Stop sensor control.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:

Set up complete
sensor control.
OK
Spin speed
1600 rpm
Extras
not selected
 Save
Before using for the first time
 Take hold of the door and pull it
open.
Tip: Leave the door slightly open to
allow the drum to dry.
 Switch the washing machine off with
the  control.
11:02
25