Miele WWV 980 WPS Passion Operating Instructions Manual page 57

 = low water level
 = medium water level
 = high water level
 = intensive rhythm
 = normal rhythm
 = sensitive rhythm
 = ultra sensitive rhythm
 = handwash rhythm
 = carried out
– = not carried out
This washing machine has fully
electronic controls with automatic load
control. The washing machine takes in
the right amount of water required for
the programme depending on the
amount of laundry and its absorbency
rate.
The programme sequences outlined in
the chart are based on the basic
programme with a full load.
The washing machine programme
sequence display shows which stage of
the programme has been reached.
Programme sequence
Special features in the
programme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens  and Silks 
programmes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, two rinses are carried out. If
a temperature of less than 60 °C is
selected, three rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
3)
An additional rinse is carried out if:
– The Extra rinse
selected
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down-filled items.
Subsequent water intake for the main
wash is through compartment .
Extra has been
57