Table of Contents
Advertisement
Before using for the first time
Start the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
The following message appears in the
display:
Turn on the tap and start the Cottons
90°C programme without any laundry
Confirm the message with the
OK sensor.
To do this, the Cottons 90°C
programme must be run without
laundry and without detergent.
No other programmes can be started
until calibration has been carried out.
Turn on the tap.
Turn the programme selector to
Cottons.
Cottons
90°C
Press the Start/Stop button.
The calibration programme is started. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Set up completed
20
10:30
1:55
Duration
1600 rpm
Reach under the door grip and pull
the door open.
Switch the washing machine off with
the button.
Useful tip: For safety reasons, close the
door. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
h
Hide quick links:
Advertisement
Table of Contents
