Remoteupdate - Miele WWV 980 WPS Passion Operating Instructions Manual

Settings

RemoteUpdate

The
RemoteUpdate
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home").
The RemoteUpdate function is used to
update the software in your washing
machine. If an update is available for
your washing machine, it will
automatically download it. Updates will
not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your washing machine
in the usual way. However, Miele
recommends installing updates.
Activating/Deactivating
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
112
menu option is only
Running RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele@mobile app.
A message will appear in your washing
machine display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
washing machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch off the washing
machine during an update.
Otherwise, the update will be aborted
and will not be installed.
– Some software updates can only be
carried out by the Miele Customer
Service Department.