6. Start the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottons programme
must be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:
Open the stopcock and start the Cottons
90°C programme with an empty drum
Confirm with the OK sensor.
The display will then change to the
standard display for the Cottons pro-
gramme.
Overview
Temperature
90 °C
Cottons
TwinDos
Whites
1:57
h
Timer
Touch the Start/Stop sensor.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme the follow-
ing message will appear in the display:
Set up complete
Before using for the first time
Take hold of the door and pull it
open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washing machine off with
the control.
11:02
Spin speed
1600
rpm
Extras
not selected
Save
25