Appendix E
If you need to repack the antenna unit for shipment, the two
shipping restraints (tie-wraps) removed during installation must
be replaced. The following instructions explain how to repack
the TracVision R5/R4 antenna unit for shipping.
1. Remove the four plugs from the forward and rear
tie-wrap holes on the bottom of the baseplate.
Antenna Baseplate (Bottom View)
2. Remove the eight screws securing the radome.
Remove the radome and set it aside.
Radome
Screws
Radome Screws
54-0359 Rev. A
Reshipping Instructions
Forward
Tie-wrap
Holes
Rear
Tie-wrap
Holes
29