Mount the Switchplate
10
12
1. Fit the switchplate flush into the switchplate
panel cutout that you made earlier.
A. Panel Cutout
3.82"
(97 mm)
2.36"
(60 mm) 2.05"
(52 mm)
3.19"
(81 mm)
Switchplate Mounting
2. Drill out four 5/32" (4 mm) holes in the screw
cavities in the switchplate.
3. Drill four 3/32" (2.5 mm) holes in the mounting
surface using the switchplate screw cavities as the
template. Then secure the switchplate assembly to
the mounting surface using four #6 self-cutting
screws.
4. Gently snap the switchplate cover onto the
switchplate.
5. Reconnect vehicle power. Be sure to replace the
vehicle fuse that you removed earlier.
C. Switchplate Cover
B. Switchplate
3
/
" (2.5 mm)
32
Screw Cavities
5
/
" (4 mm)
32
54-0359 Rev. A