KVH Industries TracVision R5 Installation Manual page 27

Appendix C
Transponder information has to be entered for each of the
following polarizations/frequencies:
– vertical high & vertical low
– horizontal high & horizontal low
or
– right
– left
The TracVision R5/R4 antenna requires that the fields for all
transponder categories be filled in. If the selected satellite does
not have information for one or more of the transponder
categories, default information should be entered in the fields as
follows:
Transponder Data
Frequency
Symbol Rate
FEC Code
Network ID
Polarity and Band
6. Type @SAVE,A then press Enter to save your
settings (or @SAVE,B if data is for the User2
satellite).
7. Type @DEBUGOFF then press Enter.
8. Type ZAP then press Enter. Wait one minute for
the antenna to initialize.
One of your user-defined satellites has now been added to the
satellite library and is now available for tracking. To begin
tracking your user-defined satellite(s), refer to "Install Satellites"
on page 14, and choose "USER1" or "USER2" in Step 6.
54-0359 Rev. A
User-defined Satellites
Default Value
00000
27500
the same value as provided for
those transponders with data
0x0000
whichever combinations are not
already provided
25