Replacing An Air Filter - Huawei TP48200A-D17A5-2 Telecom Power User Manual

TP48200A-D17A5-2 Telecom Power
User Manual
Step 13 Connect cables based on the recorded information.
Step 14 Connect the power cable to the UIM02C.
Step 15 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Follow-up Procedure
Pack the removed component and return it to the local Huawei warehouse.

4.3.8 Replacing an Air Filter

Prerequisites


Context
The air filter can be directly replaced without the need to disconnect the AC input to the
system.
Procedure
Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Step 2 Remove the screws and take off the air filter, as shown in Figure 4-17.
Issue 04 (2019-12-20)
You have prepared an ESD wrist strap, a pair of ESD gloves, the cabinet door key, and
the tool kit.
The new air filter is intact.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
51