Settings For An External Source; Connection To An External Source - Toshiba D-RW2SU/D-RW2SC Owner's Manual

Recording

Settings for an external source

Connection to an external source

Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
When connecting an external equipment with monaural output to this unit, use AUDIO L jack of LINE2 (Front).
Use S-Video or Video cable and an Audio cable (commercially available) for this connection.
or
*S-Video *Video
cable cable
To LINE 2 IN
Start
68 EN
Another source
(VCR camcorder etc.)
*Audio
cable
Front of this unit
CH
ON/STANDBY
REC MODE REC
L2 S-VIDEO VIDEO L
1
Press [SETUP].
2
Using [K / L], select "Required Setting".
Press [ENTER].
*Audio
cable
or
To LINE 1 IN
I /y
R
or
*Video *S-Video
cable cable
*Commercially
available
Back of this unit