Function Setup
Settings for Progressive Scan Mode (cont'd)
144
EN
4
Using [K / L], select "Progressive".
Press [ENTER].
Progressive
Still Mode
5
Using [K / L], select "ON". Press [ENTER].
Confirmation window will appear.
6
Using [{ / B], select "Yes". Press [ENTER].
Final confirmation window will appear.
• If your TV does not support progressive scan, distorted picture or
blank screen will appear when "Yes" option is selected. In this
case, just wait for 15 seconds for auto recovery.
Video
OFF
Auto
Video - Progressive
ON
OFF
Video - Progressive
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE: If there is no picture or picture is
distorted after selecting "Yes",
Wait about 15 seconds for auto recovery.
Yes
Activate?
No