Recording
Settings for an external equipment
Connection to an external equipment
Connect the external equipment using either the input jacks, AV1, AV2, AV3 (Rear) or AV4 (Front). However, for AV4
jacks, you have to select S-VIDEO input or VIDEO input jack depending on the connected devices.
Use a commercially available Scart, S-Video or Video cable and an Audio cable for this connection.
Start
1
In stop mode, press [SETUP].
2
Select "Required Setting" using [K / L], then
press [ENTER].
Required Setting menu will appear.
3
Select "Select Video" using [K / L], then
press [ENTER].
Select Video
TV Aspect
4
Select the input jack type to be used using
[K / L], then press [ENTER].
<e.g. AV4 (Front)>
• If you want to use VIDEO input jack (Composite), select
"Video In".
• If you want to use S-VIDEO input jack, select "S-Video In".
5
Press [SETUP] to exit.
Setup
Required Setting
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
Video In
4 : 3 Letter Box
Select Video - AV4 (Front)
Video In
S-Video In
EN
55