Recording An External Source - Toshiba D-R4SC Owner's Manual

Recording
DVD-RAM DVD-RW DVD-R

Recording an external source

You can record programs from connected equipment on a DVD-RAM/R/RW disc.
Connect according to A or B.
• To record a clearer picture,
use the S video jack.
External equipment
To video To audio
output jack output jacks
Audio cable
Video cable
Preparation
• Load a DVD-RAM/R/RW into the recorder.
– Load a disc which has sufficient remaining space to record the program.
– Make sure the loaded disc is not write-protected.
Notes
• If a source of high quality sound track such as DVD audio is recorded with this recorder, the sound quality becomes regular
audio CD quality. Refer to the instructions of the connected equipment.
• When you record an external source onto a DVD-R/RW disc, set the connected equipment to output sound you want to
record (if selectable such as multiplex broadcasting), as the recorder records sounds of external source in the stereo type
onto a DVD-R/RW disc, neglecting the setting of "DVD compatible mode" (
• DVD-R/RW discs cannot record contents with copy restriction signal embedded (copy-protected or copy once contents),
DVD-RAM discs can record copy once contents.
• Some satellite programs via a connected tuner may contain both 4:3 pictures and 16:9 pictures. DVD-R/RW discs cannot
record such contents, under restriction of the DVD-Video standard. To record these programs, use DVD-RAM discs.
38
A: Using the input jacks on the rear of the recorder
Video cable
Audio cable
To video
output
To audio
jack
output jacks
B: Using the input jacks on the front of the recorder
Yellow
White
Red
Rear of the recorder
White Red
INPUT 2 (L-2)
page 33).
INPUT1 (L-1)
Yellow