4
Using [CH
select the input of the unit which the external
equipment is connected. (L2 or L1)
• To use the input jacks on the back of this unit,
select "L1" position by pressing [0], [0], [1] with
the Number buttons on the remote control or the
[CH
• To use the input jacks on the front of this unit,
select "L2" position by pressing [0], [0], [2] with
the Number buttons on the remote control or the
[CH
5
Select a recording mode pressing
[REC MODE].
Refer to "Recording Mode" on page 65.
XP
SEP
6
Press [REC I] on the unit to start recording.
7
Press "Play" on the external source to record
from.
8
Press [STOP C] on the front panel of the unit
to stop recording.
This operation may take a while
to be completed.
/
] or the Number buttons,
/
].
/
].
SP
LP
SLP
EP
EN
71