Toshiba D-RW2SU/D-RW2SC Owner's Manual page 25

Make one of the following connections, depending on the capabilities of
your existing equipment.
Basic Audio
TV
Audio cable
(supplied)
This unit
VIDEO OUT
COMPONENT
VIDEO IN VIDEO OUTPUT
VIDEO OUT
IN
S-VIDEO
Y
L
IN OUT
OUT L L
P B /C B
R
R
R
ANTENNA P /C COAXIAL
AUDIO IN R R
AUDIO OUT
(L1)
AUDIO OUT
AUDIO OUT
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on
the TV's original remote control that selects an external input channel until the DVD recorder's picture appears. Check
your TV owner's manual for details.
Notes
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
• When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT
jack.
• This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to "ON".
To set progressive scan mode, refer to page 143.
Better picture
R L
S-Video cable
(commercially available)
S-VIDEO OUT
Method 1
S-VIDEO IN
S-VIDEO
OUT
Method 2
Best picture
COMPONENT
VIDEO IN
Y
P /C
B B
P /C
R R
Component Video cable
(commercially available)
COMPONENT
VIDEO OUTPUT
Y
P /C
B B
P /C
R R
COMPONENT VIDEO OUT
EN 25