Settings For External Equipment - Toshiba RD100KB Owner's Manual

E2TE0BD_EN.book Page 38 Friday, March 5, 2010 4:49 PM
2
Press [SAT.LINK].
• "Sat" will appear on the front panel display and the unit
goes into the satellite link standby mode.
To cancel the satellite link function in the satellite link
standby mode:
Press [ ON STANDBY] or [SAT.LINK] to turn on the unit.
To cancel the satellite link function while the satellite link
recording is in progress:
On the front panel
Press [C STOP].
On the remote control
1 Press [STOP C].
2 Select "Yes" using [K L], then press [ENTER OK].
Note
• Recording picture will be distorted if the copy protection
signal is being detected during satellite link timer recording.
• [SAT.LINK] does not work under the following
circumstances:
- Setup menus are displayed.
- "Timer Programming" menu is displayed.
- Title list or any file list is displayed.
- During timer recording (counting from 4 minutes before the
starting time).
- During playback of HDD or DVD.
- During recording or dubbing of HDD or DVD.
• When a regular timer recording and the satellite link timer
recording are overlapped, the examples are given below.
Example 1
Timer
Recording
Satellite Link
Actual
Recording
Example 2
Timer
Recording
Satellite Link
Actual
Recording
Example 3
Timer
Recording
Satellite Link
Actual
Recording
38
EN

Settings for External Equipment

Video Colour System
When you record from external equipment, you can set the
format Auto, PAL or SECAM.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Video Colour System" using [K L],
then press [ENTER OK].
4
Select "Auto", "PAL" or "SECAM" using [K L],
then press [ENTER OK].
General Setting
Playback
Auto Chapter
Display
Recording Audio Select (XP)
Video
Auto Finalise
Recording Video Colour System
Aspect Ratio (Video mode)
Clock
Auto
Channel
PAL
Bilingual Recording Audio
DivX
SECAM
HDMI External Input Audio
DVB Setting Video Colour System
Reset All
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to PAL.
SECAM: The video colour system will be set to
SECAM.
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or SECAM
is detected, an error message appears on the screen and
recording will be paused. Recording will be resumed when a
PAL or SECAM signal is detected.
Recording from External Equipment
Video VR
HDD HDD HDD
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
Before recording from external equipment, see page 19 for
connection instructions.
1
Turn on the TV and be sure to select the input to
which the unit is connected.
If you want to record to the HDD, press [HDD].
If you want to record to a disc, press [DVD] and insert
a recordable disc.
2
Select the input terminal to which the external
equipment is connected (AV1, AV2 or AV3).
Press [INPUT SELECT ] repeatedly to select the
external input mode, then press [PROG.
repeatedly to select AV1, AV2 or AV3.
3
Select a recording mode using [REC MODE].
(See page 28.)
4
Press [I REC] on the unit to start recording.
5
Press the [PLAY B] button on the external
equipment.
DVD-R DVD-R DVD-R
]