Toshiba D-RW2SU/D-RW2SC Owner's Manual page 139

Note
• Dynamic Range Control function is available only on the discs which are recorded in the Dolby Digital format.
C
Settings for DTS (Default : OFF)
Digital Out - DTS
ON
OFF
• Select a setting using [K / L], then press [ENTER].
Your setting will be activated.
ON : Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to
"ON".
OFF : No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set
to "OFF".
Dynamic Range Control (Default : ON)
Set to "ON" to compress the range between soft and loud sounds.
Audio
Digital Out
Dynamic Range Control ON
• Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
4
Press [SETUP] to exit.
Audio - Dynamic Range Control
ON
OFF
EN 139