Handicare SystemRoMedic ReTurn7500 Manual page 5

Farther back in the chair
If the patient slides forward in the wheelchair, the ReTurn can be used to help the patient to slide farther back in the chair.
Remove/raise the wheelchair foot plates, and then run the ReTurn in towards the wheelchair. The patient places his/her feet
on the foot plate, grasps the raising ladder, leans forward, and then lifts from the seat. The caregiver provides counter pres-
sure. Slide the patient farther back in the chair when he/she has lifted slightly from the seat.
Using ReTurnBelt together with ReTurn7500
See manual for ReTurnBelt.
ReTurnBelt is used for raising from a seated to a standing position, and for support in the standing position in combination
with the use of ReTurn transfer platform. ReTurnBelt has a more rigid lower section for easy application and an elastic up-
per section for a better and more comfortable fit. ReTurnBelt has several gripping alternatives and a locking strap for extra
support and safety in connection with the use of the ReTurn platform.
Two caregivers with ReTurnBelt
Brake the wheels on the ReTurn. The patient then leans
forward and grasps the handles on the ReTurn. The
caregivers then grasp the handles on the ReTurnBelt.
ReTurnBelt allows different gripping alternatives, and
helps and encourages the patient to lean forward.
One caregiver helps the patient to lean forward and pro-
vides support during raising.
SystemRoMedic
M A N U A L
TM
One caregiver with ReTurnBelt
Fasten the clasp without tensioning the strap. A click is heard
when the clasp is secured.
Brake the wheels on ReTurn.
The caregiver encourages the patient to lean forward while
providing support during raising by grasping either a handle
or the strap.
The patient leans forward and grasps the handles on ReTurn.
English
5