Table of Contents
Advertisement
LPT Connector (CN14)
PCM-9562 can support LPT or Floppy via CN15. LPT (Line Print Terminal) is the
original, yet still common, name of the parallel port interface on IBM PC-compatible
computers. It was designed to operate a text printer that used IBM's 8-bit extended
ASCII character set.
Standby Power Connector (CN16)
PCM-9562 can support both ATX and AT power supply.
1.
ATX power supply:
You can use standard 4 pins 12 V power output from power supply directly to connect
to CN5. For auto power off feature, you should use cable 1700015741 connect to
CN16 (Standby Power Connector) to provide 5VSB power input.
2.
AT power supply:
You can use standard 4 pins 12 V power output from power supply directly to connect
to CN5.
PC104 plus Connector (CN17)
PCM-9562 supports PC-104 plus and it includes PCI and ISA interface which are fol-
low PC-104 standard. It is intended for industrial embedded computing environments
where applications depend on reliable data acquisition.
GbE3 LED Connector (CN18)
CN18 is a connector for GbE3 indication LED.
USB Connectors (CN20, CN21, CN28, CN29)
The board provides up to 8* USB (Universal Serial Bus) ports. This gives complete
Plug and Play, and hot attach/detach for up to 127 external devices. The USB inter-
faces comply with USB specification Rev. 2.0 which supports 480Mbps transfer rate,
and are fuse protected.
Reset Button Connector (CN22)
CN22 is for system reset button. System reset clears any pending errors or events
and bring a system to normal condition or initial state.
Power Button Connector (CN23)
CN23 is 2 pin wafer type connector and support to turn on/off system.
SIR Connector (CN24)
The boards can support IrDA function (optional by request). The function is shared
from COM2 and data transfer rate is up to 115kbps.
PCM-9562 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12
Advertisement
Table of Contents
