Connector Settings - Advantech PCM-9562 User Manual

2.2.2

Connector Settings

Audio CD-In Connector (CN16)
CD In cable used to send audio CD sound to the computer's audio chipset via CN16.
Audio Connector (CN4)
The Audio link is a 2x8 pin connector, the PCM-9562 can support speaker-out, Line-
IN, Line-out with Realtek ALC888, HD audio. Detailed pin assignments refer to
Appendix A.
Power Connector (CN5)
PCM-9562 can support both ATX and AT power supply.
1. ATX power supply:
You can use standard 4 pins 12V power output from power supply directly to connect
to CN5. For auto power off feature, you should use cable 1700015741 connecting to
CN16 (Standby Power Connector) to provide 5VSB power input.
2. AT power supply:
You can use standard 4 pins 12V power output from power supply directly to connect
to CN5.
Inverter Connector (CN6)
PCM-9562 can provide +5 V and +12 V and signal to LCD inverter board via CN6.
VGA Connector (CN8)
The DB15-pin female connector is provided for video monitors.
LVDS Connector (CN9)
Low-voltage differential signaling, or LVDS, is an electrical signaling system that
can run at very high speeds over inexpensive twisted-pair copper cables. LVDS is a
differential signaling system, which means that it transmits two different voltages
which are compared at the receiver. LVDS uses this difference in voltage between
the two wires to encode the information.
PCM-9562 supports 18bit LVDS panel via CN9.
Ethernet Connector (CN10, CN12, CN14)
For the Ethernet port, PCM-9562 equipped with 3 high performance giga ethernet
ports which are fully compliant with IEEE 802.3ab 1000Base-T. It is supported by all
major network operating systems.
GbE1/2 LED connector (CN11)
CN11 is a connector for GbE1 and GbE2 indication LED.
HDD LED and POWER LED Connector (CN13)
CN13 is a front panel connector to indicate power and HDD status.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11 PCM-9562 User Manual