Do not choose Disable in the RIPv1 & v2 list if you want to enable Dynamic Routing. After
clicking Apply, more information will be displayed in Current Routing Table.
Label
Current Routing
Table
Static Route Entry
Mode
RIPv1 &v2
Telnet Setting
ORing Industrial Networking Corp.
Description
Shows all routing information, including static and dynamic routing (if
enabled)
Fills in corresponding information to add new entries to the static
routing tablet
Choose Gateway Mode if you want PCs in the LAN to visit external
network, otherwise choose Router Mode
Choose Disable to disable dynamic routing or other options to
configure the interfaces for dynamic routing
This option is only available when dynamic routing is enabled. It
allows you to make detailed configurations via simple comments.
IGMG-P83244GC+-D4G
User Manual
49