ORiNG IGMG-P83244GC+-D4G User Manual page 31

Label
Data Encryption
TCP Server Port
Idle Timeout
Alive Check
Max Connection
TCP Client Mode
In TCP Client mode, the device can establish a TCP connection with a server by the
method you set (Startup or any character). After the data has been transferred, device
can disconnect automatically from the server by using the TCP alive check time or idle
timeout settings.
ORing Industrial Networking Corp.
Description
Use SSL to encrypt data.
Set the port number for data transmission.
When serial port stops data transmission for a defined period of
time (Idle Timeout), the connection will be closed and the port will
be freed and try to connect with other hosts. 0 indicates disabling
this function. Factory default value is 0. If multilink is configured,
only the first host connection is effective for this setting.
The serial device will send TCP alive-check package in each
defined time interval (Alive Check) to remote host to check the
TCP connection. If the TCP connection is not alive, the
connection will be closed and the port will be freed. 0 indicates
disabling this function. Factory default is 0.
The number of maximum connections can be supported. The
maximum value is 5, default values is 1.
IGMG-P83244GC+-D4G
User Manual
27