ORiNG IGMG-P83244GC+-D4G Quick Installation Manual

M2M
Gateway
Q I
I N D U S T R I A L
uick nstallation

Introduction

IGMG-P83244GC+-D4G is a breakthrough innovation product which is a
combine powerful hardware and software IoT gateway. It is using dual core
ARMv7 Cortex-A9 CPU operating speed up to 1.3 GHz. It integrates 8 ports
industrial Ethernet which 6 ports in switch mode for LAN and 2 ports in
standalone for WAN, and 4 SFP fiber in combo ports and provides LTE 4G
connectivity with AT&T® certification and dual SIM card support. It is also
built in mSATA storage 64GB(optionally up to 256GB) for huge IOT data
collection. There are two serial ports RS232/422/485 and RS422/485 which
both can support Modbus RTU serial protocol to connect with serial devices
and providing all-in-one solutions to help user build up highly reliable and
user-friendly SCADA and IOT system for variant industrial automation
applications. IGMG-P83244GC+-D4G
including IPsec, OPENSSL VPN. It can provide remote access service
through ORing-PaaS platform and NAT/firewall to protect networking
security.

Package Contents

The device is shipped with the following items. If any of these items is missing
or damaged, please contact your customer service representative for
assistance.
Contents Pictures Number
IGMG-P83244GC+-D4G
CD
QIG
Mounting Kit
LTE Antenna

Preparation

Before you begin installing the device, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Safety & Warnings
Elevated Operating Ambient: If installed in a closed environment, make sure
the operating ambient temperature is compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow: Make sure the amount of air flow required for safe operation
of the equipment is not compromised during installation.
Mechanical Loading: Make sure the mounting of the equipment is not in a
hazardous condition due to uneven mechanical loading.
Q I G
IGMG-P83244GC+-D4G
IGMG-P83244GC+-D4G
G
uide
Circuit Overloading: Consideration should be given to the connection of the equipment
to the supply circuit and the effect that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate ratings
should be used when addressing this concern.

Dimension

also supports VPN client/server
X 1

Panel Layouts

X 1
Front View
5
X 1
IGMG-P83244GC+-D4G
WAN
SIM Card Slot
W1 W2
1 P.O.E.
SIMs
1 | 2
X 2
LAN Switch
3
2
P1 P2
4
11
P3 P4
COM1
X 2
Rx Tx
Rx Tx
COM2
1 P5 P6
Link 10/1000M
Activity 100M
No Link
17

Bottom View

3
1907-200-GP83244C+1-FX010
IGMG-P83244GC+-D4G
WAN
SIM Card Slot
Cellular
ANT. 1
Storage
W1 P.O.E. W2
R.M.
SIMs
1 | 2 Ring
SIM1 SIM2
LAN Switch
P1 P2
P3 P4
COM1
Rx Tx
PWR1
Rx Tx
PWR2
COM2
P.O.E
P5 P6
Reset
Link 10/1000M
Activity 100M Cellular
No Link ANT. 2
6 18
1. Gigabit Combo port (P5/P6 as LAN port;
W1/W2 as WAN port)
2. Gigabit LAN port
2
3. LNK/ACT LED for LAN port
Cellular
ANT. 1
4. Link speed indicator for LAN port
Storage
7 R.M.
9
5. SIM card slot
8 Ring
10 6. Data storage LED
SIM1 SIM2
7. R.M. status LED
1
8. Ring status LED
9. WAN connection LED
10. SIM indicator
12
PWR1
11. Serial TX/RX LED
13
PWR2
14
P.O.E
12. Power 1 LED
15
2
13. Power 2 LED
Reset 16
14. PoE indicator
Cellular
ANT. 2
15. Faulty relay indicator
16. Reset button
1. Din-rail screw holes
18
17. Serial port
2. Wall-mount screw holes
18. Cellular antenna connector
1. Serial port
2. Terminal blocks: PWR1, PWR2
(12-48V DC), Relay
3. Grounding screw
1
2
PRINTED ON RECYCLED PAPER
Industrial Cellular M2M Gateway

Installation

DIN-rail Installation

Step 1: Slant the device and screw the Din-rail kit onto the back of the device, right in the
middle of the back panel.
Step 2: Slide the device onto a DIN-rail from the Din-rail kit and make sure the device clicks
into the rail firmly.

Wall-mounting

Step 1: Screw the two pieces of wall-mount kits onto both ends of the rear panel of the
device. A total of six screws are required, as shown below.
Step 2: Use the device, with wall mount plates attached, as a guide to mark the
correct locations of the wall-mounting screws.
Rear View
Step 3: Insert a screw head through the large part of the keyhole-shaped aperture on the
plate, and then slide the device downwards. Tighten the screw for added stability.

Network Connection

The device has two 10/100/1000Base-T(X) Ethernet ports. According to the link type, the
device uses CAT 3, 4, 5, 5e, UTP cables to connect to any other network device (PCs,
servers, switches, routers, or hubs). Please refer to the following table for cable
Specifications.
Version 1.0
IGMG-P83244GC+-D4G
WAN
SIM Card Slot
Cellular
ANT. 1
Storage
W1 P.O.E. W2
SIMs R.M.
1 | 2 Ring
SIM1 SIM2
LAN Switch
P1 P2
P3 P4
COM1
Rx Tx PWR1
Rx Tx PWR2
COM2
P.O.E
P5 P6
Reset
Link 10/1000M
Activity 100M Cellular
No Link ANT. 2
Quick Installation Guide