ORiNG IGMG-P83244GC+-D4G User Manual page 30

Label
Data Encryption
Idle Timeout
Alive Check
Max Connection
*Not allowed to mapping Virtual COM from web
TCP Server mode
In TCP Server mode, IMG is configured with a unique port combination on a TCP/IP network.
In this case, IMG waits passively to be contacted by the device. After the device establishes a
connection with the serial device, it can then proceed with data transmission. The TCP
Server mode also supports up to 5 simultaneous connections, so that multiple device can
receive data from the same serial device at the same time.
ORing Industrial Networking Corp.
Description
Use SSL to encrypt data.
When serial port stops data transmission for a defined period of
time (Idle Timeout), the connection will be closed and the port will
be freed and try to connect with other hosts. 0 indicates disabling
this function. Factory default value is 0. If multilink is configured,
only the first host connection is effective for this setting.
The serial device will send TCP alive-check package in each
defined time interval (Alive Check) to remote host to check the
TCP connection. If the TCP connection is not alive, the
connection will be closed and the port will be freed. 0 indicates
disabling this function. Factory default is 0.
The number of maximum connections can be supported. The
maximum value is 5, default values is 1.
IGMG-P83244GC+-D4G
User Manual
26