Printer Leds; Bluetooth Connectivity; Initial Set-Up; Set-Up Ios Device - Infinite Peripherals DPP-450 User Manual

DPP-450 User Manual

Printer LEDs

No Error
Detected
Standby Printer is offline.
Power LED: None
Status LED: Green
Initialization Sets the printer's memory offline. After
initialization is complete, the printer is
offline.
Power LED: Green
Status LED: Red
Waiting Error Specific error conditions occur such as
Cancellation Status paper roll empty, paper cover open, and so
forth. Press the Feed button for standby
mode.
Power LED: None
Status LED: Red
Temperature Error Print head temperature is increased by
continuous printing. If the print head
temperature exceeds 70 degrees C, the
print head stops automatically to prevent
overheating. The printer goes offline and
only resumes printing when the print head
temperature returns to 60 degrees C or
below.
Power LED: Green > No LED Off
Status LED: No LED (Off) > Red
Paper Empty When the paper roll reaches the end, the
status LED illuminates.
Power LED: Off
Status LED: Red
Battery Low Power LED: Green
Status LED: No LED (Off)
Paper Cover Open Power LED: Off
Status LED: Red
Charging Power LED:
Green > Green > No LED (Off)
Status LED: No LED (Off)
Charging Complete Power LED: Green
Status LED: No LED (Off)
Description

Bluetooth Connectivity

Enable Bluetooth on your printer before pairing your iOS
device or Android device.

Initial Set-up

Press Feed after each entry.
1. To scroll down to the Pairing information, tap Print.
2. Tap Yes or No
• Disable Authentication = No.
• Change Pairing = Yes.
• Save Pairing = Yes

Set-up iOS Device

1. Access Settings > Bluetooth.
2. Tap to turn on green button.
3. Tap the name of the printer, IPC DPP-450, and then Pair
to connect.
4. Confirm DPP-450 is displayed in My Devices.
18