Set-Up The Hardware; Configuration Menu Options; Diagnostic Self-Test; Hex Dump Mode - Infinite Peripherals DPP-450 User Manual

DPP-450 User Manual

Set-up the Hardware

1. Turn on the printer.
2. Press and hold the Power button until the Status LED
blinks .
red
3. Once the LED stops blinking, release the button. The
printer is in Hardware Set-up Mode.
4. Press the Feed button to print the current settings. The
Hardware Configuration menu is displayed.
5. Press one of the following:
• Print to navigate between options.
• Feed to select an option.
• Power to return to the previous option.

Configuration Menu Options

These characters are supported:
• Western - 1252
• CE - 1250
• Turkish - 1254 or 857
• Baltic - 1257 or 775
• Cyrillic - 1251
• Greek - 1253 or 737
• Hebrew - 1255 or 862
• Arabic - 1256, 1256A, 1256F
• Thai - 874
• English - 437
• Latin 1 - 850
• Portuguese - 860
• Latin 2 - 852
• Bulgarian - 856
• VISCII

Diagnostic Self-Test

You can enter printer modes in your printer via the
Feed button. These modes are used to help developers
in debugging programming and communication issues.
Press the Power button and Feed button at the same
1.
time to turn on the printer, which also starts the self-
test.
When the Status LED illuminates and the printer
2.
begins printing, release the Feed button.
Once the self test is completed, the printer is in
3.
Standby mode.

Hex Dump Mode

1. To print computer data in hexadecimal numbers and
characters, press and hold the Feed button, then press
the Power button.
2. When the printer beeps and the Power LED is green,
release the Feed button.
3. Hexadecimal numbers and characters from the host
system are printed in Dump mode.
4. Press the Power button again to cancel Hex Dump mode.
15